13
2023
-
02
De-Sander Cyclone manufacturers take you to understand the characteristics of water blasting machines and dry blasting machines
Author:
The manufacturer of De-Sander Cyclone tells you that the wet sandblasting machine is also called the water sandblasting machine. Its advantage is that it is smaller than the dry sandblasting machine and has no dust. The dust produced is dissolved in water, but the water in the equipment must be replaced for a period of time.
The manufacturer of De-Sander Cyclone tells you that the wet sandblasting machine is also called the water sandblasting machine. Its advantage is that it is smaller than the dry sandblasting machine and has no dust. The dust produced is dissolved in water, but the water in the equipment must be replaced for a period of time. The price is slightly higher than the dry spraying machine, but the wet spraying machine is slower than the dry spraying machine, and the surface smoothness of the workpiece is slightly higher than that of the dry spraying machine.
The manufacturer of De-Sander Cyclone tells you that the water sandblasting protection fluid uses the anti-rust and corrosion inhibition technology. It is a low-preparation, time-sensitive, and environmentally friendly protection fluid. It protects the surface of the sandblasting steel during the water sandblasting work and subsequent cleaning. To avoid flash rust and rust on the sandblasting surface, water sandblasting is mixed with water according to the minimum preparation in the water tank before application, because the water sandblasting protection liquid has timeliness, and the aging time is related to the construction environment and the proportion of the preparation. Water Sand blasting protective fluid is an environmentally friendly water-soluble liquid, yellow or light yellow transparent liquid, light or odorless, non-flammable, no unique deflagration characteristics, no harm to the human body and zero environmental pollution.
Liquid sandblasting is to put the abrasive into the water, use the abrasive pump and air compression as the power, and spray the abrasive liquid to the surface of the workpiece through the spray gun at high speed to clean and illuminate the surface of the part. It is suitable for directly cleaning oily and lipid stains. For materials whose surface must be prevented from discoloration due to temperature rise, liquid sandblasting machines are also more suitable than dry sandblasting machines. The manufacturer of De-Sander Cyclone tells you that the main feature is the application of fine powder sand, liquid sandblasting has its unique experience, and dry test sandblasting has its limitations.
The wet sandblasting machine puts the abrasive into the water, and uses the grinding pump and air compressor to spray the abrasive liquid onto the surface of the workpiece at high speed according to the spray gun, so as to achieve the effect of cleaning and decorating the surface of the parts. The wet sandblasting machine has high sandblasting efficiency and low cost of abrasives, which achieves the purpose of improving the surface smoothness and surface strength of the workpiece.
The manufacturer of De-Sander Cyclone tells you that the wet sandblasting machine uses wet test and sealing work, and tap water and sand are used as the grinding liquid abrasive, which also works in a cycle, so it does not produce smoke and dust during work, does not discharge harmful sewage, and will not pollute the environment. The installation of the equipment is convenient and simple, and does not require a separate workshop.
quality De-Sander Cyclone supplier(s) china,china De-Sander Cyclone supplier(s),Discount De-Sander Cyclone price(s) china
Next page
Next page
undefined
Contact Us
Address：No.95 Huihe Road, Weihai City, Shandong, China
Tel：0086 631 5779116
Skype/Wechat：8618563155995
Fax：0086 631 5621557
E-mail：info@haiwang-tec.com
Copyright © Haiwang Technology Group