07
2023
-
03
Importance of Well Drilling Mud Purification Cyclone in Work Use
Author:
Well Drilling Mud Purification Cyclone is the secondary and tertiary solid control equipment in the drilling fluid purification system, which can further separate the smaller particle solid phase contained in the mud treated by the vibrating screen, so that the mud can enter the fourth-stage separation equipment. Drilling fluid cleaners, mud cleaners, and high-efficiency cleaners are welcome to consult and purchase.
Well Drilling Mud Purification Cyclone is the secondary and tertiary solid control equipment in the drilling fluid purification system, which can further separate the smaller particle solid phase contained in the mud treated by the vibrating screen, so that the mud can enter the fourth-stage separation equipment. Drilling fluid cleaners, mud cleaners, and high-efficiency cleaners are welcome to consult and purchase.
During work, the unique design of Well Drilling Mud Purification Cyclone allows each cyclone to get the same pressure to maximize its effectiveness. They can remove the sediment in the drilling fluid. The sand removal cyclone is relatively light, Made of wear-resistant polyurethane material, it has the characteristics of long service life and easy maintenance. Therefore, after the valve at the inlet of each cyclone is closed, the hydrocyclone can be easily disassembled and repaired. And the service life of the polyurethane cyclone is twice that of other common cyclones. There are generally two points of failure of the Well Drilling Mud Purification Cyclone at work:
The first point: the discharge port is bonded, and the liquid and solid phases are combined with each other
The solution to such problems is to reduce the solid content, increase the number of cyclones, check whether the vibrating screen is damaged, check whether the related product accessories are closed, and reduce ROP.
The second point: the mud is too dirty, the solid control equipment does not work continuously, the mud in the cyclone is dry, the vibrating screen is broken or the vibrating screen is passed, the pump speed is too fast, the impeller size is too large, and the throttle position valve is wrong .
Causes: 1. The hydraulic head is too low, first of all, the inlet part is blocked, the size of the impeller is too small, the steering of the pump is wrong, and the solid deposits in the pipeline.
2. Increase the industrial pressure head, adjust and correct the pump head, increase the size of the impeller, clean the pipeline, and install it near the suction end.
3. The manufacturer of Well Drilling Mud Purification Cyclone tells you that it is necessary to eliminate the bonding of the liquid port and the bonding of the liquid and the solid phase.
quality Well Drilling Mud Purification Cyclone supplier(s) china,china Well Drilling Mud Purification Cyclone supplier(s),Discount Well Drilling Mud Purification Cyclone price(s) china
undefined
Contact Us
Address：No.95 Huihe Road, Weihai City, Shandong, China
Tel：0086 631 5779116
Skype/Wechat：8618563155995
Fax：0086 631 5621557
E-mail：info@haiwang-tec.com
Copyright © Haiwang Technology Group